Could someone with one of the subject cars please carefully measure the width and height of the centre section of one of the taillamp lenses? There's a wall separating the reverse light from the brake/tail, and at the other end there's a wall separating the reflector from the brake/tail. I need the width between the inner surfaces of those two walls, and the "floor" to "ceiling" height. I've got a taillamp upgrade project I'm working on and don't have ready access to one of these lenses right now.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

I'll see what I come up with tonight when I get home. Are we talking vernier caliper or tape measure accuracy?

-James

_________________

Tape measure'll be just fine, thanks!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Dan-
Looks like 5 7/16"W x 2 3/4"H per my trusty, uncalibrated Stanley tape measure. Bear in mind that includes the 1/8" black trim band around the red lens section, so the red panel is actually 1/4" less. Can email pics if you like.

-James

_________________

Pics would be great - thanks!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Alright, I'll shoot some when I get home later tonight.

-James

_________________

Done.

-James

_________________

Thanks!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.