This is my first post here. I have a 66 Dart with stock 6. I have an aluminum radiator from a 740 volvo turbo with auto trans. It measures 18 x 16 1/2 x 1 1/4. Could I use this in place of my stock radiator? Is there a way to size a radiator for a particular application? I may be going to a turbo later and have the intercooler from the volvo to.

Welcome to the board. As far as using a Volvo rad., if it physically fits and the inlet/outlet is in the correct or close position I dont see why not ,as I always say use what you got. Slanters are tinkerers and adapters and we tend to adapt alot unusual stuff anyway.Good luck with your project.

_________________
Ive got a slanted attitude and a heavy right foot.