Hi there US Slanters!

I build my new slant for my GTX... and used a 390 cfm double pumper... Do you have any info on a near there main jet info for this? I´m using a 270/280 cam with 108 lobe center line, bigger valves, etc.

I´m using now #58 in primaries and #60 in secondaries... secondaries seem short... (no power valve there)

Here is a small video I took...

http://www.youtube.com/watch?v=6gqfxrzprQw

Cheers!!!!!!!

_________________
Men are not jugded by the way they fall, but by the way they get up

I have close to the same jetting on mine. Comp Cam 264. I used a lighter seconary spring to get then to open a little sooner which helped with the transition. Hope this helps.

Thanks Andy! Mine´s a Double pumper... not vaccum secondaries... but seems i´m near...

_________________
Men are not jugded by the way they fall, but by the way they get up

Cool! Keep me posted on your progress. Good luck!