Spring has sprung! From my clutch linkage, that is. Trouble is, I don't know where it came from. I was changing the oil and saw it just barely hanging onto my clutch fork. The spring is a little smaller than a valve spring and has hooks on both ends. I have no clue where this came from.

Any ideas?

_________________
If it was easy, everybody would be doing it.

That spring goes between a hole on the leading edge of your bell housing and the clutch fork. Most likely where it is hanging from now. Stretch it forward and you will find a matching hole in the bell housing. It keeps the throwout bearing from riding on the pressure plate release arms.

Sam

_________________

Thanks! I see what you're saying now. No telling how long it has been off.

_________________
If it was easy, everybody would be doing it.