Hi guys. Mine is a '65 cuda, original. The window cranks/door handles take a very small (SAE I assume) hex head socket. 1/4" is way too big (and the smallest I have in SAE). So i tried my 6mm, then 5 mm -- still too big. I checked year one for specialty tools, but no luck.

So, does anybody know the correct size? And, is the tool possibly thin wall to fit into the handle opening, arround the hex head? Do I need to have a vendor suggested or will this be a craftsman/kolbalt stock item?

I appreciate your knowledge. Don

_________________
1965 Barracuda

Try 5/32"

Richard

_________________
Part of Tyrde-Browne Racing

it is a standard size-- I have one of those folding style set of allen wrenches-- & they work no problem-- nothing fancy, Lawrence

Richard, I'll find a 5/32nds and try it. I suspect it will be the one. Thanks, Don.

_________________
1965 Barracuda

Well, my '65 cuda ultimately took a 3/16ths (quarter inch drive) socket, once I had the chance to try various small sized sockets. Don't know if other years take the same or not.

Don

_________________
1965 Barracuda