Please see attached diagram, for reference I have a 66 Dart GT 225, auto, Holley 1920. Throttle return spring is missing, anyone know a part number or size, weight, of spring?

Dont know but I can measure the one on my 64 and post it for ya..

Its's the stock parts there for now.

Greg

_________________
http://www.youtube.com/hyperpack

I bought a set of 6 assorted springs on Amazon and just messed with it till I found one that fit the needs on my Volare.

Hi Greg, I hate to be a pain but were you able to measure your spring? Thanks.

Ooh That car is home now.. I totally forgot about it, I will get it tonite.

Greg

_________________
http://www.youtube.com/hyperpack

Thanks Greg, side question, what size rear wheels are they that you can tuck them into the rear wells?

17 X 8's at +52 Offset with a 69 B body rear, I am sure with the proper "A" or "FJM" Body Rear end and proper offset you can fit 17 X 9's without cutting.... Bigger than that then you are into mini tub territory.

My + 52 MM 17X 8's ave about an inch clearance to the centerline of the car's body, but Do rub the outer wheel house in full compression.


↓↓↓↓Read about the maladies of all that here↓↓↓↓
https://www.slantsix.org/forum/viewtopi ... 6&start=60

Greg

_________________
http://www.youtube.com/hyperpack

upon inspection I think my spring was broke and butchered and cobbled sometime before I owned the car.. but it still works properly as is.

20201030_194525 by Hyperpack, on Flickr


20201030_194644 by Hyperpack, on Flickr

20201030_194520 by Hyperpack, on Flickr

20201030_194450 by Hyperpack, on Flickr


Greg

_________________
http://www.youtube.com/hyperpack

GREAT! Thank you Greg ad thanks for the wheel discussion!!!

Jay

No problem.. you need to stop out this way sometime and I will take ya for a ride in the dart.

Greg

_________________
http://www.youtube.com/hyperpack