Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Oct 27, 2025 7:31 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3
Author Message
 Post subject: Re: Shim head gaskets
PostPosted: Mon Dec 13, 2021 7:15 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8967
Location: Silver Springs, Fl.
Car Model:
Got the gaskets on Friday.
I have a problem with the composition gaskets. The "BIG BORE" gaskets that people wanted were Permaseal AP210. They had a bore size of 3.660
The gaskets I received are "ACL AP210". They have a bore size of 3.550.
The shim gaskets have a bore size of 3.510
The problem with the Ap210 is my fault. I went by the part number and didn't inquire about the brand.
Those of you that ordered the composition AP210 "big bore", let me know if you still want them, with the smaller bore size, or wish to cancel them.
My error, so if you wish to cancel, that is my problem. I'll have to "eat it".
Meanwhile I'll start packaging the shim gaskets for those that are just getting those. Give me a few days.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Mon Dec 13, 2021 11:39 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:02 pm
Posts: 1847
Location: Waterloo, Iowa
Car Model: '23 T-bucket
Charlie; I'm good with the "small bore" gaskets.

Thanks.....Roger


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Tue Dec 14, 2021 3:25 am 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9022
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Charlie, I really don't need the smaller bore size gaskets. I have plenty of them. See if someone else want or needs that size. Are you planning to reorder the big bore ones? If no one wants the ones that came in I'll keep them. I don't want you to eat them! I'm sure they aren't very tasty! :D :D

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Tue Dec 14, 2021 3:37 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8967
Location: Silver Springs, Fl.
Car Model:
Quote:
Charlie, I really don't need the smaller bore size gaskets. I have plenty of them. See if someone else want or needs that size. Are you planning to reorder the big bore ones? If no one wants the ones that came in I'll keep them. I don't want you to eat them! I'm sure they aren't very tasty! :D :D
No problem. I'm going to check and see if the Permaseal gaskets are available.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Fri Dec 31, 2021 5:24 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:02 pm
Posts: 1847
Location: Waterloo, Iowa
Car Model: '23 T-bucket
Say, Charlie......have you sent anything out yet?

Just checking, because if you have, I haven't recieved it yet.

Roger


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Sat Jan 08, 2022 3:38 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8967
Location: Silver Springs, Fl.
Car Model:
I have been sending out the gaskets a little at a time. Please bare with me. I will send a PM with tracking number when each is shipped.

I found some money in an envelope on my desk. If someone sent me cash, please let me know. I really don't know if it was for gaskets or something else. Don't know where it came from.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Tue Jan 18, 2022 5:20 pm 
Offline
Triple Duece Weber
User avatar

Joined: Tue Nov 23, 2004 6:05 pm
Posts: 2467
Location: Desoto Texas
Car Model: 1972 Dodge Colt
Got my gaskets today Charlie.
Thank you for the careful packing and extra effort.

I know that was a lot of work and I appreciate it!

_________________
Hyper_pak


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Wed Jan 19, 2022 4:19 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8967
Location: Silver Springs, Fl.
Car Model:
All gaskets have been shipped. If anyone doesn't have theirs by Sat or monday, let me know. Or if packages are damaged.
(Lou and Rick I'm holding yours for possible hand delivery)

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject: Re: Shim head gaskets
PostPosted: Wed Jan 19, 2022 5:21 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9941
Location: IRWIN PA
Car Model:
Got mine.. Packaged with indestructo methods and materials.

Thank you Charrile.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3

All times are UTC-07:00


Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited