| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Tear down of Valiant engine is revealing. https://www.slantsix.org/forum/viewtopic.php?t=44134 |
Page 1 of 1 |
| Author: | drgonzo [ Mon Mar 21, 2011 4:54 am ] |
| Post subject: | Tear down of Valiant engine is revealing. |
Nix the cam numbers.....I realize I checked it wrong....it's been a while since I've done this. The converter is 11" Is the stock converter 11 or 12" |
|
| Author: | Dart270 [ Mon Mar 21, 2011 5:59 pm ] |
| Post subject: | |
10.75" is stock. Lou |
|
| Author: | drgonzo [ Mon Mar 21, 2011 6:58 pm ] |
| Post subject: | |
OK, here is what I have found so far during disassembly: Flat top pistons 244NP .060" over 4.125" stroke Clifford 276 Mechanical Cam. Deck Height average -.186 Felpro composite gasket (black) CC Volume to be determined. Looks like I might have a compression AND converter issue! |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|