I have read all the carb data on this and the other site. I have also read the Mopar Muscle articles with the '62 Val aluminum block. ( very nice).
While It seems that Clifford had been promoting the use of the 40 IDF 70 for best street perf., they have now changed thier stance. I am perplexed. do they not test these reccomendations before making them. do they even know what they are talking about. I have bought a weber 40 Idf 70 and am now wondering if I should sell it before trying it on my engine. I do not have all the parts to hook it up nor do I think I want to buy the clifford intake if they cannot support thier reccomendations. I know this is long. I hope that you can clear up some of my comfusion.
for a good street six with big valves shaved head over .030 I have a choice of cams either the erson TQ 20 M with .465 lift and 270 adv. or a 264s maker unknown. Please suggest induction and proper stall.
Many thanks. Other opinions are welcome as well.
