Slant Six Forum
https://www.slantsix.org/forum/

Tuning my kick down
https://www.slantsix.org/forum/viewtopic.php?t=7055
Page 1 of 1

Author:  greasy 225 [ Mon Sep 29, 2003 2:31 pm ]
Post subject:  Tuning my kick down

I was wonderng what the correct/best way to adjust my kickdown linkage in my 62 Valinent? It no longer kicks down and the shifts seem lazy, it's all the way in 3rd by the time I'm through an intersection. Help! I tried spining it a couple times each way but it didn't chane any thing.
-Jesse

Author:  Dennis Weaver [ Mon Sep 29, 2003 10:59 pm ]
Post subject: 

I recommend making the rod as long as it can be and still allow the carb to reach WOT without binding. If the upshift speed at that adjustment is to high for your liking, back it off in small increments and test drive until you are satisfied.

"DW"

Author:  greasy 225 [ Tue Sep 30, 2003 1:08 am ]
Post subject: 

Cool thanks, I'll try that out.
-Jesse

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/